S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
11-5
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 11 Configuring EtherChannels
Information About EtherChannels
•
LACP-Enabled and Static EtherChannels Differences, page 11-7
LACP Overview
Note
You must enable LACP before the feature functions.
Figure 11-1
shows how individual links can be combined into LACP EtherChannels and channel groups
as well as function as individual links.
Figure 11-1
Individual Links Combined into an EtherChannel
With LACP, you can bundle up to eight interfaces in a channel group.
Note
When you delete the EtherChannel, Cisco NX-OS automatically deletes the associated channel group.
All member interfaces revert to their previous configuration.
You cannot disable LACP while any LACP configurations are present.
LACP ID Parameters
LACP uses the following parameters:
•
LACP system priority—Each system that runs LACP has an LACP system priority value. You can
accept the default value of 32768 for this parameter, or you can configure a value between 1 and
65535. LACP uses the system priority with the MAC address to form the system ID and also uses
the system priority during negotiation with other devices. A higher system priority value means a
lower priority.
Note
The LACP system ID is the combination of the LACP system priority value and the MAC
address.
•
LACP port priority—Each port configured to use LACP has an LACP port priority. You can accept
the default value of 32768 for the LACP port priority, or you can configure a value between 1 and
65535. LACP uses the port priority with the port number to form the port identifier. LACP uses the
port priority to decide which ports should be put in standby mode when there is a limitation that
prevents all compatible ports from aggregating and which ports should be put into active mode. A
Switch
A
Switch
B
Channel group1
po2
po1
Channel group 2
1/1
1/2
1/5
1/3
1/4
2/1
2/ 2
Port channel
Individual link
2/5
2/3
2/4
187537
Содержание N5010P-N2K-BE
