Cisco N5010P-N2K-BE, Руководство по настройке программного обеспечения

Страница: 248 / 704

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
16-8
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 16 Configuring AAA
Configuring AAA
Configuring Default Login Authentication Methods
The authentication methods include the following:
•
Global pool of RADIUS servers
• Named subset of RADIUS or servers
•
Local database on the Nexus 5000 Series switch
• Username only
The default method is local.
Before you configure default login authentication methods, configure RADIUS or server
groups as needed. To configure default login authentication methods, perform this task:
Enabling Login Authentication Failure Messages
When you log in, the login is processed by the local user database if the remote AAA servers do not
respond. If you have enabled the displaying of login failure messages, the following message is
displayed :
Remote AAA servers unreachable; local authentication done.
Remote AAA servers unreachable; local authentication failed.
To enable login authentication failure messages, perform this task:
Command Purpose
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# aaa authentication login
default
{
group
group-list [
none
]|
local
|
none }
Configures the default authentication methods.
The group-list argument consists of a
space-delimited list of group names. The group
names are the following:
• radius —Uses the global pool of RADIUS
servers for authentication.
•
named-group —Uses a named subset of
or RADIUS servers for
authentication.
The local method uses the local database for
authentication. The none method uses the username
only.
The default login method is local , which is used
when no methods are configured or when all of the
configured methods do not respond.
Step 3
switch(config)# exit
Exits configuration mode.
Step 4
switch#
show aaa authentication
(Optional) Displays the configuration of the default
login authentication methods.
Step 5
switch# copy running-config startup-config
(Optional) Copies the running configuration to the
startup configuration.