Cisco N5010P-N2K-BE, Руководство по настройке программного обеспечения

Страница: 210 / 704

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
11-8
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 11 Configuring EtherChannels
Configuring EtherChannels
Note If you want LACP-based EtherChannels, you need to enable LACP (see the “Enabling LACP” section
on page 11-10 ).
To create an EtherChannel, perform this task:
This example shows how to create an EtherChannel:
switch# configure terminal
switch (config)# interface port-channel 1
To remove the EtherChannel and delete the associated channel group, perform this task:
Adding a Port to an EtherChannel
You can add a port to a new channel group or to a channel group that already contains ports. Cisco
NX-OS creates the EtherChannel associated with this channel group if the EtherChannel does not
already exist.
Note If you want LACP-based EtherChannels, you need to enable LACP (see the “Enabling LACP” section
on page 11-10 ).
To configure an EtherChannel, perform this task:
Command Purpose
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# interface
port-channel channel-number
Specifies the port-channel interface to configure, and
enters the interface configuration mode. The range is
from 1 to 4096. Cisco NX-OS automatically creates the
channel group if it does not already exist.
Command Purpose
switch(config)# no interface
port-channel channel-number
Removes the EtherChannel and deletes the associated
channel group. See the
“Compatibility Requirements”
section on page 11-2 for details on how the interface
configuration changes when you delete the
EtherChannel.
Command Purpose
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# interface type
slot / port
Specifies the interface that you want to add to a channel
group and enters the interface configuration mode.
Step 3
switch(config-if)# switchport mode
trunk
(Optional) Configures the interface as a trunk port.