49
Chapter 4: Configuring the Gateway
The Administration Tab
Wireless-G ADSL Gateway with 2 Phone Ports
Diagnostics
Ping Test
Ping Test Parameters
Ping Target IP
. Enter the IP Address that you want to ping in the field. This can be either a local IP or an Internet
IP address.
Ping Size
. Enter the size of the ping packets.
Number of Pings
. Enter the number of times that you want to ping.
Ping Interval
. Enter the ping interval in milliseconds.
Ping Timeout
. Enter the time in milliseconds.
Ping Result
. The results of the ping test will be shown here.
Click the
Start Test
button to start the Ping Test.
Backup&Restore
The Backup&Restore tab allows you to back up and restore the Gateway’s configuration file.
To back up the Gateway’s configuration file, click the
Backup
button. Then follow the on-screen instructions.
To restore the Gateway’s configuration file, click the
Browse
button to locate the file, and follow the on-screen
instructions. After you have selected the file, click the
Restore
button.
Factory Defaults
Restore Factory Defaults
. If you wish to restore the Gateway to its factory default settings and lose all your
settings, click
Yes
.
To begin the restore process, click the
Save Settings
button to save these changes, or click the
Cancel Changes
button to undo your changes.
Figure 4-43: Administration Tab - Diagnostics
Figure 4-44: Administration Tab - Backup&Restore
Figure 4-45: Administration Tab - Factory Defaults