Cisco Linksys WAG54GP2 Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 126

background image

116

Appendix J: Regulatory Information

Wireless-G ADSL Gateway with 2 Phone Ports

Appendix J: Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including

interference that may cause undesired operation of the device.

«
...
122
123
124
125
126
»

Содержание Linksys WAG54GP2































































































































Отзывы:

Нет отзывов

Похожие инструкции для Linksys WAG54GP2

Бренд: GE Страницы: 3

Бренд: GE Страницы: 124

Бренд: ISYGLT Страницы: 7

Бренд: ICU tech Страницы: 17

Бренд: Nortel Страницы: 111

NFS/DFS Secure Gateway

Бренд: IBM Страницы: 67

Бренд: Datapulse Страницы: 26

Бренд: ATCOM Страницы: 8

GHP Reactor Steer-by-Wire Volvo

Бренд: Garmin Страницы: 6

AIG-501-T-AZU-LX

Бренд: Moxa Technologies Страницы: 8

Бренд: ZyXEL Communications Страницы: 5

Бренд: AVM Страницы: 12

Link Gate GSM ISDN

Бренд: Linkcom Страницы: 22

Busch-free@home DG-M-1.16.11

Бренд: Busch-Jaeger Страницы: 35

Бренд: Ness Страницы: 4

NetSmart Wireless Gateway

Бренд: Current Cost Страницы: 7

MediaAccess TG389ac

Бренд: Technicolor Страницы: 74

Бренд: D-Link Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды