Cisco IE 3000, Руководство по настройке программного обеспечения

Страница: 820 / 874

B-32
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
Beginning in privileged EXEC mode, follow these steps to upload an image to an FTP server:
The archive upload-sw command builds an image file on the server by uploading these files in order:
info, the Cisco IOS image, and the web management files. After these files are uploaded, the upload
algorithm creates the tar file format.
Caution
For the download and upload algorithms to operate properly, do not rename image names.
Copying Image Files By Using RCP
You can download a switch image from an RCP server or upload the image from the switch to an RCP
server.
You download a switch image file from a server to upgrade the switch software. You can overwrite the
current image with the new one or keep the current image after a download.
You upload a switch image file to a server for backup purposes. You can use this uploaded image for
future downloads to the same switch or another of the same type.
Command Purpose
Step 1 Verify that the FTP server is properly configured by
referring to the
“Preparing to Download or Upload a
Configuration File By Using FTP” section on page B-13 .
Step 2 Log into the switch through the console port or a Telnet
session.
Step 3 configure terminal Enter global configuration mode.
This step is required only if you override the default remote
username or password (see Steps 4, 5, and 6).
Step 4 ip ftp username username (Optional) Change the default remote username.
Step 5
ip ftp password password (Optional) Change the default password.
Step 6
end Return to privileged EXEC mode.
Step 7 archive upload-sw
ftp:
[[ // [ username [ : password ] @ ] location ] / directory ] /
image-name .tar
Upload the currently running switch image to the FTP
server.
•
For // username : password , specify the username and
password. These must be associated with an account on
the FTP server. For more information, see the
“Preparing
to Download or Upload an Image File By Using FTP”
section on page B-29
.
•
For @ location , specify the IP address of the FTP server.
• For / directory / image-name .tar , specify the directory
(optional) and the name of the software image to be
uploaded. Directory and image names are case sensitive.
The
image-name .tar is the name of the software image
to be stored on the server.