manualshive.com logo in svg

Cisco IE 3000, Руководство по настройке программного обеспечения

Cisco IE 3000 - коммутатор промышленного класса с высокой надежностью и производительностью. Руководство по настройке программного обеспечения может быть скачано бесплатно с manualshive.com. Это идеальное решение для промышленных сетей, предлагающее высокую безопасность и эффективность.

Поделиться
Скачать
background image

 

11-38

Cisco IE 3000 Switch Software Configuration Guide

OL-13018-03

Chapter 11      Configuring Switch-Based Authentication

Configuring the Switch for Secure Socket Layer HTTP

The primary role of the HTTP secure server (the switch) is to listen for HTTPS requests on a designated 
port (the default HTTPS port is 443) and pass the request to the HTTP 1.1 Web server. The HTTP 1.1 
server processes requests and passes responses (pages) back to the HTTP secure server, which, in turn, 
responds to the original request.

The primary role of the HTTP secure client (the web browser) is to respond to Cisco IOS application 
requests for HTTPS User Agent services, perform HTTPS User Agent services for the application, and 
pass the response back to the application. 

Certificate Authority Trustpoints

Certificate authorities (CAs) manage certificate requests and issue certificates to participating network 
devices. These services provide centralized security key and certificate management for the participating 
devices. Specific CA servers are referred to as 

trustpoints

.

When a connection attempt is made, the HTTPS server provides a secure connection by issuing a 
certified X.509v3 certificate, obtained from a specified CA trustpoint, to the client. The client (usually 
a Web browser), in turn, has a public key that allows it to authenticate the certificate.

For secure HTTP connections, we highly recommend that you configure a CA trustpoint. If a CA 
trustpoint is not configured for the device running the HTTPS server, the server certifies itself and 
generates the needed RSA key pair. Because a self-certified (self-signed) certificate does not provide 
adequate security, the connecting client generates a notification that the certificate is self-certified, and 
the user has the opportunity to accept or reject the connection. This option is useful for internal network 
topologies (such as testing).

If you do not configure a CA trustpoint, when you enable a secure HTTP connection, either a temporary 
or a persistent self-signed certificate for the secure HTTP server (or client) is automatically generated. 

  •

If the switch is not configured with a hostname and a domain name, a temporary self-signed 
certificate is generated. If the switch reboots, any temporary self-signed certificate is lost, and a new 
temporary new self-signed certificate is assigned. 

  •

If the switch has been configured with a host and domain name, a persistent self-signed certificate 
is generated. This certificate remains active if you reboot the switch or if you disable the secure 
HTTP server so that it will be there the next time you re-enable a secure HTTP connection. 

Note

The certificate authorities and trustpoints must be configured on each device individually. Copying them 
from other devices makes them invalid on the switch.

If a self-signed certificate has been generated, this information is included in the output of the 

show 

running-config

 privileged EXEC command. This is a partial sample output from that command 

displaying a self-signed certificate.

Switch# 

show running-config

Building configuration...

<output truncated>

crypto pki trustpoint TP-self-signed-3080755072

 enrollment selfsigned

 subject-name cn=IOS-Self-Signed-Certificate-3080755072

 revocation-check none

 rsakeypair TP-self-signed-3080755072

!

!

crypto ca certificate chain TP-self-signed-3080755072

 certificate self-signed 01

Содержание IE 3000











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IE 3000

Vanguard 340 Installation Manual preview
340
Бренд: Vanguard Страницы: 121
BandLuxe R500 Series User Manual preview
R500 Series
Бренд: BandLuxe Страницы: 67
H3C SR8800 IM-FW-II Command Reference Manual preview
SR8800 IM-FW-II
Бренд: H3C Страницы: 107
3Com MSR 50 Series Safety Information Manual preview
MSR 50 Series
Бренд: 3Com Страницы: 12
H3C S9500 Series Operating Manual preview
S9500 Series
Бренд: H3C Страницы: 16
H3C H3C S3600 Series Datasheet preview
H3C S3600 Series
Бренд: H3C Страницы: 10
H3C MSR 930 Installation Manual preview
MSR 930
Бренд: H3C Страницы: 42
H3C MSR 800 Installation, Quick Start preview
MSR 800
Бренд: H3C Страницы: 2
H3C H3C S7500E Series Instruction Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 34
H3C MSR Series Manual preview
MSR Series
Бренд: H3C Страницы: 33
H3C CR16000-F Configuration Manual preview
CR16000-F
Бренд: H3C Страницы: 14
H3C MSR 3600 Hardware Information And Specifications preview
MSR 3600
Бренд: H3C Страницы: 56
H3C H3C S7500E Series Configuration Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 112
H3C S3100-52P Command Manual preview
S3100-52P
Бренд: H3C Страницы: 15
H3C SR8800 IM-FW-II Manual preview
SR8800 IM-FW-II
Бренд: H3C Страницы: 5
H3C H3C S7500E Series Installation Manual preview
H3C S7500E Series
Бренд: H3C Страницы: 50
H3C MSR810 Manual preview
MSR810
Бренд: H3C Страницы: 37
H3C CR16000-F Installation, Quick Start preview
CR16000-F
Бренд: H3C Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды