Cisco IE 3000, Руководство по настройке программного обеспечения

Страница: 670 / 874

36-10
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 36 Configuring QoS
Understanding QoS
Figure 36-4 shows the policing and marking process.
Figure 36-4 Policing and Marking Flowchart on Physical Ports
Mapping Tables
During QoS processing, the switch represents the priority of all traffic (including non-IP traffic) with an
QoS label based on the DSCP or CoS value from the classification stage:
•
During classification, QoS uses configurable mapping tables to derive a corresponding DSCP or
CoS value from a received CoS, DSCP, or IP precedence value. These maps include the
CoS-to-DSCP map and the IP-precedence-to-DSCP map. You configure these maps by using the
mls
qos map cos-dscp and the mls qos map ip-prec-dscp global configuration commands.
On an ingress port configured in the DSCP-trusted state, if the DSCP values are different between
the QoS domains, you can apply the configurable DSCP-to-DSCP-mutation map to the port that is
on the boundary between the two QoS domains. You configure this map by using the
mls qos map
dscp-mutation global configuration command.
•
During policing, QoS can assign another DSCP value to an IP or a non-IP packet (if the packet is
out of profile and the policer specifies a marked-down value). This configurable map is called the
policed-DSCP map. You configure this map by using the
mls qos map policed-dscp global
configuration command.
868
3
5
Ye s
Ye s
No
No
P ass
through Drop
M a rk
Get the cl as ific a tion
re s ult for the p a cket.
I s a policer configured
for thi s p a cket?
Check if the p a cket i s in
profile by querying the policer.
Check out-of-profile a ction
configured for thi s policer.
Drop p a cket.
Modify D S CP a ccording to the
policed-D S CP m a p. Gener a te
a new Qo S l a bel.
S t a rt
Done