Cisco IE 3000, Руководство по настройке программного обеспечения

Страница: 618 / 874

33-6
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 33 Configuring SNMP
Configuring SNMP
Configuring SNMP
These sections contain this configuration information:
•
Default SNMP Configuration, page 33-6
• SNMP Configuration Guidelines, page 33-6
•
Disabling the SNMP Agent, page 33-7
• Configuring Community Strings, page 33-8
•
Configuring SNMP Groups and Users, page 33-9
• Configuring SNMP Notifications, page 33-11
•
Setting the CPU Threshold Notification Types and Values, page 33-15
• Setting the Agent Contact and Location Information, page 33-16
•
Limiting TFTP Servers Used Through SNMP, page 33-16
• SNMP Examples, page 33-17
Default SNMP Configuration
Table 33-4 shows the default SNMP configuration.
SNMP Configuration Guidelines
If the switch starts and the switch startup configuration has at least one snmp-server global
configuration command, the SNMP agent is enabled.
An SNMP group is a table that maps SNMP users to SNMP views. An SNMP user is a member of an
SNMP group. An SNMP host is the recipient of an SNMP trap operation. An SNMP engine ID is a name
for the local or remote SNMP engine.
Table 33-4 Default SNMP Configuration
Feature Default Setting
SNMP agent Disabled
1
.
1. This is the default when the switch starts and the startup configuration does not have any snmp-server global configuration
commands.
SNMP trap receiver None configured.
SNMP traps None enabled except the trap for TCP connections ( tty ).
SNMP version If no version keyword is present, the default is Version 1.
SNMPv3 authentication If no keyword is entered, the default is the noauth (noAuthNoPriv)
security level.
SNMP notification type If no type is specified, all notifications are sent.