Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 57 of 177
2. Do a local (offline) configuration using the Configurator interface.
For further information, refer to
“Device configuration using the
For a quick overview of the initial configuration process, refer to the
flowchart below.
NOTE
Each individual Fluidmesh radio transceiver unit has a factory-
set mesh identification number that takes the form
5.w.x.y
.
If the unit's IP address is set to
169.254.x.y/24
as in Case 2
below, the values
x
and
y
represent parts
x
and
y
of the unit's
mesh identification number.
