Cisco FM3500 Endo, Руководство по установке и настройке

Страница: 112 / 178

Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 112 of 177
Authentication
Method
Available Inner Authentication Methods
TTLS
• PAP (Password Authentication Protocol)
• CHAP (Challenge-Handshake
Authentication Protocol)
• MSCHAP (Microsoft Challenge-Handshake
Authentication Protocol)
• MSCHAPV2
• MD5
• GTC
PEAP
• MSCHAPV2
• MD5
• GTC
12. Save the RADIUS settings by clicking the Save button.
Alternatively, clear the settings by clicking the Reset button.
7.7.8. NTP Configuration
All Fluidmesh radio transceiver units have a built-in clock.
No manual time-setting controls are provided. Instead, the unit has network
time protocol (NTP) functionality that allows it to synchronize its time
settings with a chosen internet time server. If the unit cannot synchronize
with its primary time server, and the host name of a backup time server is
entered, the unit defaults to synchronizing with the backup server.
To change the NTP settings, do the following steps:
1. Click the -ntp link under ADVANCED SETTINGS in the left-hand
settings menu.
• The
NTP dialog will be shown ( Figure 46 (page 113) ).
CAUTION
The same NTP configuration must be set for all Fluidmesh units
in the wireless network.
If the same NTP settings are not applied to all units, the network
may encounter timestamp conflicts and/or equipment
malfunctions.