Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 100 of 177
•
Cell A2 of the *.CSV file would contain the parameter
5.29.252.213, 5.2.22.136,0
•
Cell A3 of the *.CSV file would contain the parameter
5.29.252.213,5.155.105.128,1
•
Cell A4 of the *.CSV file would contain the parameter
5.155.105.128,5.29.252.213,1
Figure 36. Sample Pass list (Example 2)
5.
Example 3:
If you want to create a simple Block list that includes
the links between unit ID numbers 5.2.22.136 and 5.29.252.213
(
• Cell A1 of the *.CSV file would contain the parameter
5.2.22.136,5.29.252.213
• Cell A2 of the *.CSV file would contain the parameter
5.29.252.213, 5.2.22.136
Figure 37. Sample Block list (Example 3)
6. Save and close the *.CSV file.
To upload a Pass list or Block list using the Configurator interface, do the
following steps:
1. Click the
–pass list / Block list
link under
ADVANCED
SETTINGS
in the left-hand settings menu.
