![background image](http://html.mh-extra.com/html/cisco/asr-5x00-home-enodeb/asr-5x00-home-enodeb_administration-manual_64831517.webp)
Traffic Policing and Shaping
Traffic Shaping Configuration ▀
Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
517
If the configured value for downlink max data rate is larger than can fit in an R4 QoS profile, the
default of 64 kbps is used.
If either the received uplink or downlink max data rates is non-zero, traffic policing is employed if
enabled for the background class. The received values are used for responses when traffic policing is
disabled.
Step 3
Verify that your APNs were configured properly by entering the following command:
show apn { all | name <
apn_name
> }
The output is a concise listing of configured APN parameter settings.
Step 4
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide
and the
Command Line Interface Reference
.