Gx Interface Support
Rel. 8 Gx Interface ▀
Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
315
2.
Within the same context, configure the subscriber template to use the IMSA service as described in the Applying
IMS Authorization Service to Subscriber Template section.
3.
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec
mode command
save configuration
. For additional information on how to verify and save configuration
files, refer to the
System Administration Guide
and the
Command Line Interface Reference
.
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the
Command Line Interface Reference
for complete
information regarding all commands.
Configuring IMS Authorization Service at Context Level
Use the following example to configure IMSA service at context level for IMS subscribers:
configure
context
<context_name>
ims-auth-service
<imsa_service_name>
policy-control
diameter origin endpoint
<endpoint_name>
diameter dictionary
<dictionary>
diameter request-timeout
<timeout_duration>
diameter host-select table { 1 | 2 } algorithm round-robin
diameter host-select row-precedence
<precedence_value>
table { 1 | 2 } host
<primary_host_name>
[ realm
<primary_realm_id>
] [ secondary host
<secondary_host_name>
[
realm
<secondary_realm_id>
] ] [ -noconfirm ]
failure-handling cc-request-type { any-request | initial-request | terminate-
request | update-request } { diameter-result-code { any-error |
<result_code>
[ to
<end_result_code>
] } } { continue | retry-and-terminate | terminate }
exit
exit
diameter endpoint
<endpoint_name>
[ -noconfirm ]
origin realm
<realm_name>
use-proxy
origin host
<host_name>
address
<ip_address>
no watchdog-timeout
response-timeout
<timeout_duration>
