![background image](http://html.mh-extra.com/html/cisco/asr-5x00-home-enodeb/asr-5x00-home-enodeb_administration-manual_64831148.webp)
PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW in an LTE-SAE Network
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
148
diameter authentication server <
s6b_cfg_name
> priority <
num
>
diameter accounting server <
rf_cfg_name
> priority <
num
>
exit
aaa group default
radius attribute nas-ip-address address <
ipv4_address
>
radius accounting interim interval <
seconds
>
diameter authentication dictionary <
name
>
diameter accounting dictionary <
name
>
diameter authentication endpoint <
s6b_cfg_name
>
diameter accounting endpoint <
rf_cfg_name
>
diameter authentication server <
s6b_cfg_name
> priority <
num
>
diameter accounting server <
rf_cfg_name
> priority <
num
>
end
Creating and Configuring an LMA Service
Use the following configuration example to create the LMA service:
configure
context <
pgw_context_name
>
lma-service <
lma_service_name
> -noconfirm
no aaa accounting
revocation enable
bind address <
s5s8_ipv6_address
>
end
Notes:
The
no aaa acounting
command is used to prevent duplicate accounting packets.
Enabling revocation provides for MIP registration revocation in the event that MIP revocation is negotiated with
a MAG and a MIP binding is terminated, the LMA can send a revocation message to the MAG.
Creating a P-GW PDN Context
Use the following example to create a P-GW PDN context and Ethernet interface, and bind the interface to a configured
Ethernet port.
configure