Cisco ASR 5x00 Home eNodeB, Руководство администратора

Страница: 166 / 548

PDN Gateway Configuration
▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
166
Step 3
Create and configure APNs in the P-GW context by applying the example configuration in the Creating and
Configuring APNs in the P-GW Context section.
Step 4
Create and configure AAA server groups in the P-GW context by applying the example configuration in the Creating
and Configuring AAA Groups in the P-GW Context section.
Step 5
Create an eGTP service within the newly created context by applying the example configuration in the Creating and
Configuring an LMA Service section.
Step 6
Create a context through which the interface to the PDN will reside by applying the example configuration in the
Creating a P-GW PDN Context section.
Modifying the Local Context
Use the following example to set the default subscriber and configure remote access capability in the local context:
configure
context local
interface < lcl_cntxt_intrfc_name >
ip address < ip_address > < ip_mask >
exit
server ftpd
exit
server telnetd
exit
subscriber default
exit
administrator < name > encrypted password < password > ftp
ip route < ip_addr/ip_mask > < next_hop_addr > < lcl_cntxt_intrfc_name >
exit
port ethernet < slot#/port# >
no shutdown
bind interface < lcl_cntxt_intrfc_name > local
end
Creating and Configuring a P-MIP P-GW Context
Use the following example to create a P-GW context, create an S2a IPv6 interface (for data traffic to/from the HSGW),
and bind the S2a interface to a configured Ethernet port: