Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
225
Chapter 5
Monitoring the Service
This chapter provides information for monitoring service status and performance using the
show
commands found in
the Command Line Interface (CLI). These command have many related keywords that allow them to provide useful
information on all aspects of the system ranging from current software configuration through call activity and status.
The selection of keywords described in this chapter is intended to provided the most useful and in-depth information for
monitoring the system. For additional information on these and other
show
command keywords, refer to the
Command
Line Interface Reference
.
In addition to the CLI, the system supports the sending of Simple Network Management Protocol (SNMP) traps that
indicate status and alarm conditions. Refer to the
SNMP MIB Reference
for a detailed listing of these traps.