e) Click
Place
to put the building on the campus map. Cisco Prime Infrastructure creates a building rectangle scaled to
the size of the campus map.
f) Click on the building rectangle and drag it to the desired position on the campus map.
After adding a new building, you can move it from one campus to another without having to recreate
it.
Note
g) Click
Save
to save this building and its campus location to the database. Cisco Prime Infrastructure saves the building
name in the building rectangle on the campus map.
A hyperlink associated with the building takes you to the corresponding Map
page.
Note
Step 5
Click
Save
.
Adding Mesh Access Points to Maps with Cisco Prime
Infrastructure
After you add the .PNG, .JPG, .JPEG, or .GIF format floor plan and outdoor area maps to the Cisco Prime
Infrastructure database, you can position mesh access point icons on the maps to show where they are installed
in the buildings.
To add mesh access points to floor plan and outdoor area maps, follow these steps:
Step 1
Click the desired floor plan or outdoor area map in the Coverage Areas component of the
General
tab. Cisco Prime
Infrastructure displays the associated coverage area map.
Step 2
From the Select a command drop-down list, choose
Add Access Points
and click
GO
.
Step 3
On the Add Access Points page, choose the mesh access points to add to the map.
Step 4
Click
OK
to add the mesh access points to the map and display the Position Access Points map.
The mesh access point icons appear in the upper left area of the
map.
Note
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
230
OL-27593-01
Managing Mesh Access Points with Cisco Prime Infrastructure
Adding Mesh Access Points to Maps with Cisco Prime Infrastructure
