Cisco 7985G - IP Phone NTSC Video, Руководство администратора

Страница: 64 / 148

3-9
Cisco Unified IP Video Phone 7985G Administration Guide
OL-8726-02
Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Video Phone
Mounting the Handset Bracket
Step 1
Slide the handset bracket into the tracks as shown on Figure 3-2 . Make sure to
push it firmly into the tracks until it snaps into place.
Step 2
The handset cable will have a longer straight section at one end versus the other.
The end should be used to connect the handset cable to the underside of the video
phone.
Step 3
Run this straight section of the handset cable through the channel groove on the
underside of the phone from the plug to the handset cradle.
Step 4 Place the phone in an upright position and lay the handset in its place. Magnets
hold the handset in place.
Figure 3-2 Cisco Unified IP Video Phone 7985G Cable Connections