Cisco 7985G - IP Phone NTSC Video, Руководство администратора

Страница: 53 / 148

2-11
Cisco Unified IP Video Phone 7985G Administration Guide
OL-8726-02
Chapter 2 Preparing to Install the Cisco Unified IP Video Phone on Your Network
Adding Phones to the Cisco Unified CallManager Database
Adding Phones with Auto-Registration
You can add phones with auto-registration without first gathering MAC addresses
from the phones.
When auto-registration is enabled, Cisco Unified CallManager begins the
automatic startup process to obtain a directory number. During auto-registration,
Cisco Unified CallManager automatically assigns the next available sequential
directory number to the phone.
When you use this method, Cisco Unified CallManager automatically assigns
directory numbers to new phones as they register with Cisco Unified
CallManager.
You can use auto-registration to quickly enter phones into the Cisco
Unified CallManager database. You can then modify any settings, such as the
directory numbers, from Cisco Unified CallManager. Additionally, you can move
auto-registered phones to new locations and assign them to different device pools
without affecting their directory numbers.
The system disables auto-registration by default.
For information about enabling and configuring auto-registration, refer to Cisco
Unified CallManager Administration Guide .
Related Topics
•
Adding Phones with Auto-Registration and TAPS, page 2-11
•
Adding Phones to the Cisco Unified CallManager Database, page 2-10
• Adding Phones with BAT, page 2-13
Adding Phones with Auto-Registration and TAPS
You can add phones with auto-registration and TAPS without first gathering
MAC addresses from phones.
TAPS, the Tool for Auto-Registered Phones Support, works with the Bulk
Administration Tool (BAT) to update phones that were already added to the Cisco
Unified CallManager database with dummy MAC addresses. Use TAPS to update
MAC addresses and download predefined configurations for phones.