Cisco 7985G - IP Phone NTSC Video, Руководство администратора

Страница: 76 / 148

4-10
Cisco Unified IP Video Phone 7985G Administration Guide
OL-8726-02
Chapter 4 Configuring Settings on the Cisco Unified IP Video Phone
Network Configuration Menu
DHCP Enabled Indicates whether DHCP is being
used by the phone.
1.
Unlock network configuration options.
2.
Scroll to the DHCP Enabled option and
press the
No softkey to disable DHCP, or
press the Yes softkey to enable DHCP.
3.
Press Save .
Alternate TFTP Indicates whether the phone is
using an alternative TFTP server. 1. Unlock network configuration options.
2.
Scroll to DHCP Enabled option and press
Yes .
3.
Scroll to the Alternate TFTP option and
press
Yes if the phone should use an
alternative TFTP server. Otherwise, press
No .
4.
Press Save .
SW Port
Configuration Speed and duplex of the network
port (labeled 10/100 SW). The
following valid values apply:
• Auto Negotiate
• 10 Half—10-BaseT/half
duplex
•
10 Full—10-BaseT/full duplex
•
100 Half—100-BaseT/half
duplex
•
100 Full—100-BaseT/full
duplex
If the phone is connected to a
switch, configure the port on the
switch to the same speed/duplex as
the phone or configure both to
auto-negotiate.
1.
Unlock network configuration options.
2.
Scroll to the SW Port Configuration
option and then press
Edit .
3.
Scroll to the setting that you want and
then press
Select .
4.
Press Save .
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change