Cisco 7985G - IP Phone NTSC Video, Руководство администратора

Страница: 71 / 148

4-5
Cisco Unified IP Video Phone 7985G Administration Guide
OL-8726-02
Chapter 4 Configuring Settings on the Cisco Unified IP Video Phone
Overview of Options that are Configurable from a Phone
Overview of Options that are Configurable from a
Phone
The settings that you can change on a phone fall into several categories, as shown
in
Table 4-1 . For a detailed explanation of each setting and instructions for
changing them, see the “Network Configuration Menu” section on page 4-6 .
Note
Several options that display on the Network Configuration menu and on the
Device Configuration Menu apply for display only. You can configure some of
these options from Cisco Unified CallManager. The
“Network Configuration
Menu” section on page 4-6 or the “Device Configuration Menu” section on
page 4-12 , describe the options.
Table 4-1 Configurable Network Configuration Menu Settings
Category Description
Network Configuration
Menu Option
DHCP settings Dynamic Host Configuration
Protocol (DHCP) automatically
assigns IP address to devices when
you connect them to the network.
Cisco Unified IP Phones enable
DHCP by default. DHCP Enabled
IP settings If you do not use DHCP in your
network, you can make IP settings
manually. Domain Name
IP Address
Subnet Mask
Default Router
DNS Server 1-5
TFTP settings If you do not use DHCP to direct the
phone to a TFTP server, you must
manually assign a TFTP server. You
can also assign an alternative TFTP
server to use instead of the one that
is assigned by DHCP. TFTP Server 1
Alternate TFTP
TFTP Server 2