Cisco 7985G - IP Phone NTSC Video, Руководство администратора, Страница: 65 / 148

3-10
Cisco Unified IP Video Phone 7985G Administration Guide
OL-8726-02
Chapter 3 Setting Up the Cisco Unified IP Phone
Verifying the Phone Startup Process
Verifying the Phone Startup Process
After the Cisco Unified IP Video Phone has power connected to it, the phone
begins its startup process by cycling through the following steps.
1. The notification lamp lights up when the phone is powered. The lamp goes
off when the registration process is finished.
2.
The screen displays the Cisco Systems, Inc., logo screen.
3.
These messages display as the phone starts:
–
Configuring VLAN
–
Configuring IP
–
Querying TFTP Server
– Registering
4.
The screen displays:
–
Primary directory number
–
Additional directory numbers
–
Softkeys
If the phone successfully passes through these stages, it started up properly. If the
phone does not start up properly, see the
“Resolving Startup Problems” section on
page 9-2 .
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network
settings on the Cisco Unified IP Phone after installing the phone on the network:
•
IP address
•
IP subnet mask
•
Default gateway IP address
•
Domain name
•
DNS server IP address
•
TFTP server IP address