Cisco 3750 - Catalyst EMI Switch, Справочник по командам

Страница: 998 / 1154

B-26
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix B Catalyst 3750 Switch Debug Commands
debug matm move update
debug matm move update
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
debug matm move update
no debug matm move update
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines
The undebug matm move update command is the same as the no debug matm move update command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the
session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
canalso use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
Release Modification
12.2(25)SED This command was introduced.
Command Description
mac address-table
move update
{ receive |
transmit }
Configures MAC address-table move update feature on the switch.
show debugging Displays information about the types of debugging that are enabled.
show mac
address-table move
update Displays the MAC address-table move update information on the switch.