Cisco 3750 - Catalyst EMI Switch, Справочник по командам

Страница: 135 / 1154

2-105
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
cluster timer
cluster timer
Use the cluster timer global configuration command on the switch stack or on the cluster command switch
to set the interval in seconds between heartbeat messages. Use the no form of this command to set the
interval to the default value.
cluster timer interval-in-secs
no cluster timer
Syntax Description
Defaults The interval is 8 seconds.
Command Modes Global configuration
Command History
Usage Guidelines Enter this command with the cluster holdtime global configuration command only on the cluster
command switch. The cluster command switch propagates the values to all its cluster members so that
the setting is consistent among all switches in the cluster.
The holdtime is typically set as a multiple of the heartbeat interval timer ( cluster timer ). For example,
it takes (holdtime-in-secs divided by the interval-in-secs) number of heartbeat messages to be missed in
a row to declare a switch down.
Examples
This example shows how to change the heartbeat interval timer and the duration on the cluster command
switch:
Switch(config)# cluster timer 3
Switch(config)# cluster holdtime 30
You can verify your settings by entering the show cluster privileged EXEC command.
interval-in-secs Interval in seconds between heartbeat messages. The range is 1 to 300
seconds.
Release Modification
12.1(11)AX This command was introduced.