B-78
Catalyst 3750 Switch Command Reference
OL-8552-07
Appendix B Catalyst 3750 Switch Debug Commands
debug platform tcam
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform tcam
command is the same as the
no debug platform tcam
command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the
session
switch-number
privileged
EXEC command. Then enter the
debug
command at the command-line prompt of the stack member. You
also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
l3
{
acl
{
input
|
output
} |
ipv6
{
acl
{
input
|
output
} |
local
|
qos
|
secondary
} |
local
|
qos
|
secondary
}
Display Layer 3 field-based CAM look-up type debug messages. The
keywords have these meanings:
•
acl
{
input
|
output
}—Display input or output ACL look-up debug
messages.
•
ipv6
{
acl
{
input
|
output
} |
local
|
qos
| s
econdary
}—Display
IPv6-based look-up debug messages. Options include displaying
input or output ACL look-up, local forwarding look-up,
classification and QoS look-up, or secondary forwarding look-up
debug messages.
•
local
—Display local forwarding look-up debug messages.
•
qos
—Display classification and quality of service (QoS) look-up
debug messages.
•
secondary
—Display secondary forwarding look-up debug
messages.
read
{
reg
|
ssram
|
tcam
}
Display TCAM-read debug messages. The keywords have these
meanings:
•
reg
—Display TCAM-register read debug messages.
•
ssram
—Display synchronous static RAM (SSRAM)-read debug
messages.
•
tcam
—Display TCAM-read debug messages.
search
Display supervisor-initiated TCAM-search results debug messages.
write
{
forw-ram
|
reg
|
tcam
}
Display TCAM-write debug messages. The keywords have these
meanings:
forw-ram
—Display forwarding-RAM write debug messages.
reg
—Display TCAM-register write debug messages.
tcam
—Display TCAM-write debug messages.
Release
Modification
12.1(11)AX
This command was introduced.
Содержание 3750 - Catalyst EMI Switch
Страница 494: ...2 464 Catalyst 3750 Switch Command Reference OL 8552 07 Chapter 2 Catalyst 3750 Switch Cisco IOS Commands reserved only ...
Страница 772: ...2 742 Catalyst 3750 Switch Command Reference OL 8552 07 Chapter 2 Catalyst 3750 Switch Cisco IOS Commands show vtp ...
Страница 1132: ...D 2 Catalyst 3750 Switch Command Reference OL 8552 07 Appendix D Acknowledgments for Open Source Software ...
