Power over Ethernet (PoE) Commands
show power inline
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
365
25
gi4 Auto searching low N/A 30000 (30000) N/A
gi5 Auto searching low N/A 30000 (30000) N/A
gi6 Auto searching low N/A 30000 (30000) N/A
gi7 Auto searching low N/A 30000 (30000) N/A
gi8 Auto searching low N/A 30000 (30000) N/A
gi9 Auto searching low N/A 30000 (30000) N/A
gi10 Auto searching low N/A 30000 (30000) N/A
gi11 Auto searching low N/A 30000 (30000) N/A
gi12 Auto searching low N/A 30000 (30000) N/A
gi13 Auto searching low N/A 30000 (30000) N/A
gi14 Auto searching low N/A 30000 (30000) N/A
gi15 Auto searching low N/A 30000 (30000) N/A
gi16 Auto searching low N/A 30000 (30000) N/A
gi17 Auto searching low N/A 30000 (30000) N/A
gi18 Auto searching low N/A 30000 (30000) N/A
gi19 Auto searching low N/A 30000 (30000) N/A
gi20 Auto searching low N/A 30000 (30000) N/A
gi21 Auto searching low N/A 30000 (30000) N/A
gi22 Auto searching low N/A 30000 (30000) N/A
gi23 Auto searching low N/A 30000 (30000) N/A
gi24 Auto searching low N/A 30000 (30000) N/A
The following table describes the significant fields shown in the example:
Field
Description
Port management
mode
The current power management mode on the port.
The available options are:
•
Port limit mode—The maximum power limit per
each port is configured by the user.
•
Class limit mode—The maximum power limit
per port is determined by the class of the
device (CoS).
Legacy device
supports
Shows that the port supports or does not supports the
legacy powered devices.
Power
Shows that the PoE switch is powered on or powered
off.
Status
Operational status (Normal or Fault) of the PoE switch.
Nominal Power
Total amount of power that the switch can supply to all
connected PDs.
Allocated Power
Amount of power allocated by the PoE ports.