Syslog Commands
logging host
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
455
35
Syntax
logging host {
ipv4-address
|
ipv6-address
|
hostname
} [facility
facility
] [port
port
]
[severity
severity_level
]
no logging host
{
ip-address
|
ipv6-address
|
hostname
}
Parameters
•
ipv4-address
—IPv4 address of the SYSLOG server.
•
ipv6-address
—IPv6 address of the SYSLOG server.
•
hostname
—Hostname of the SYSLOG server. Only translation to IPv4
addresses is supported.
•
facility
facility
—(Optional) Specifies the log facility that is indicated in the
message. It can be one of the following values: local0, local1, local2, local3,
local4, local5, local 6, and local7. The default is local7.
•
port
port
—(Optional) Specifies the port number for SYSLOG messages.
The default port number is 514. (Range: 0 to 65535)
•
severity
level
—(Optional) Specifies the severity of log messages sent to
the SYSLOG server. The optional severity levels are:
<0-7> Minimum severity <0-7> (EMEGR-DEBUG)
emergencies System is unusable
alerts Immediate action needed (severity=1)
critical Critical conditions (severity=2)
errors Error conditions (severity=3)
warnings Warning conditions (severity=4)
notifications Normal but significant conditions (severity=5)
informational Informational messages (severity=6)
debugging Debugging messages (severity=7)
Default Configuration
No messages are logged to a SYSLOG server.
The default severity level is Informational.
Command Mode
Global Configuration mode
