Circutor RGU-100B, Инструкция по эксплуатации

Страница: 22 / 54

22
RGU-100B
Instruction Manual
The device has detected more WGB transformers than the installation
can accept.
The device has detected WGB transformers that are not registered in
the installation. The new installation has to be saved; this is carried out
accessing the setup menu, see
“6.5.1.- SAVE INSTALLATION”.
5�3�- DISPLAY SCREENS
The display screen shows the leakage current and the trip current and delay values of the channel,
Figure 22
.
Leakage current
instantaneous
Trip current
Trip delay
Figure 22: Display screen�
Use keys and to browse through the different screens:
Channel 1:
Trip current
(mA)
Trip delay
Total leakage current (alter direct), instantaneous (mA)
Access the general setup menu by pressing the key for > 3s.
(See
"6.- CONFIGURATION"
)
Note: If no key is pressed for 1 minute, the device goes to Channel 1's
display screen.