CIRCUIT DESIGN MU-2-R, Руководство по эксплуатации

Страница: 12 / 34

OG_MU2-ESP_v10e
12
Circuit Design, Inc.
OPERATION GUIDE
■
2.2.6 Route setting panel
4
2
3
1
5
[1] Route information
The route information set. The character string shown here may be used as the route information in various
cases.
[2] Number of relay stations
This is the number of relay stations specified.
[3] Target station
Specifies the equipment number of the station to which data will be sent. Clicking this opens a key input form for
entering the equipment number.
[4] Relay stations
Enter the equipment numbers of the relay stations. The equipment numbers are shown in hexadecimal.
Clicking them opens a key input form for entering the equipment number.
When specifying multiple relay stations, start from the left side.
[5] Source station
Specify the equipment number of the station from which data will be sent.
Clicking this displays the equipment number currently set in the MU-2-R.
■
2.2.7 Key input form
1 2
3
4
[1] Decimal value
Shows the value set as a decimal.
[2] Hexadecimal value
Shows the value set as a hexadecimal.
[3] Mode
Select whether to input the value as a decimal or hexadecimal. With decimal input the A to F keys cannot be used.
[4] Clear button
Clears the value entered.