OG_MU2-ESP_v10e
13
Circuit Design, Inc.
OPERATION GUIDE
■
2.2.8 Transmission data auto assignment form
8
7
4
5
6
1
2
3
[1] Character setting (random characters)
Generates a template character string for the data transmit command with a length specified with data size [4].
Characters are selected randomly.
[2] Character setting (same characters)
Generates a template character string for the data transmit command with a length specified with data size [4].
The characters are selected with the character selector [6].
[3] OK button
Confirms the character string for data transmission. The created data is displayed in the data input line 1.
[4] Data size
Specifies the data size. The range that can be specified is 0 to 255 bytes.
[5] Data size indicator
Indicates the data size as a decimal and a hexadecimal.
[6] Character selection
Selects the characters for the data transmit command. Data between 0 to 255 can be created, however the control
code is not shown. When sending a control code, it is possible to set the screen mode of the target station to Hex
and check the code.
[7] Character display
The characters and codes for the transmit command.
[8] Transmission character display
Shows the character sequence for the transmit command.
