8
NOTE
: This general outline will only familiarize you with the machine. Read through the
entire manual before putting this machine into operation.
1)
Control Panel:
The main control panel is used to control the direction of the material
pump and agitator, and you can also monitor the temperature of the material and heat
transfer oil.
2)
Boom Rotation Lock:
Handle locks the booms rotation.
3)
Loading Door:
Place the material on safety door to load the melting tank.
4)
Oil Level Dipstick:
Allows you to monitor the amount of Heat Transfer Oil in the tank.
5)
Oil Temperature Gauge:
Displays the heat transfer oil temperature.
6)
Aggregate Hopper:
Hopper for aggregate that will be mixed to create mastic.
7)
Ignition Switch:
Engine on and off.
8)
Sealing Wand:
Dispenses sealant
9)
Sealant Flow Control:
Control the flow rate of sealant.
10)
C1 Mastic Control Panel:
Controls for applying mastic
11)
Mastic Flow Control:
Controls the amount of aggregate that mixes into mastic.
12)
Access Port:
The sealing wand is placed in here when not in use. This allows operator
to continue circulating sealant through the hose to prevent the wand tip from cooling and
freezing up.
13)
Mastic Chute:
Mastic is dispensed from the chute, chute angle can be adjusted.
14)
Mastic Gate:
Controls the mastic to flow or stop.
Melter Feature Overview
Содержание C1
