CIMCO OXE Diesel 125 HP, Руководство по установке

Страница: 33 / 84

33
OXE 125/150/175/200 HP INSTALLATION MANUAL
FUEL SYSTEM
FUEL SYSTEM
Fuel system dimensions Metric US units
Fuel line
Quality Certified diesel resistant
Inner diameter 10 mm 0.39 in
Length between tank and pump max. 1000 mm 39.37 in
Feed hose, length 5 m 16 ft 4.85 in
Return hose, length 5 m 16 ft 4.85 in
Fuel pump Mounting height above tank 500 mm 19.68 in
Fuel tank Volume min. 100 l 26.42 gallon
The fuel enters the engine via the pre-fuel filter and external fuel pump.
The mechanical fuel injection pump output is controlled by the Engine Control Unit (ECU), and provides fuel at
the pressure required by the fuel injectors. The fuel injectors supply fuel directly to the combustion chambers of
the engine.
The mechanical fuel injection pump, fuel rail pressure, fuel injection timing, and injection duration are all
controlled by the ECU.
Fuel pre-filter
The 30-micron fuel filter is equipped with a water separator and installed after the fuel tank, on the suction side
of the fuel system, between the fuel tank and the electrical fuel feed pump. An optional water-in-fuel sensor is
available and can be ordered separately.
External fuel feed pump
The electrical fuel feed pump is mounted outside the fuel tank and is operated by the engine’s ECU. The
electrical pump motor pushes fuel from fuel tank to the engine through fuel lines.
NOTE! Use only OXE supplied electrical harness and electrical fuel feed pump.