CIMCO OXE Diesel 125 HP, Руководство по установке

Страница: 61 / 84

61
OXE 125/150/175/200 HP INSTALLATION MANUAL
DUAL STATION
In Dual Station application the backbone can be extended max. 10 m.
Only second station controlhead (single 30-0116-712, twin 30-0116-713) and
3.5” displays are supported.
Single engine application Twin engine application
Triple engine application Quad engine application
CONTROLHEAD THROTTLE AND SHIFT BEHAVIOR
In single and twin outboard applications, the corresponding controlhead lever
controls the outboard.
Triple outboard application
The center outboard receives control commands from both port and Starboard
engines including gear selection and throttle request as follows:
- Neutral gear unless both port and starboard are requesting the same gear,
then that gear is also requested for center outboard.
-
The center engine follows the lowest throttle request of the port or starboard
engine.
The center outboard is reporting control faults to the port outboard.
Quad outboard application
The port and port center outboards are paired together and controlled by the port
controlhead lever. The same applies to the starboard outboard pair. The center
outboards are reporting any control fault to their corresponding outer outboard.
INSTALLATION WIRING