CIMCO OXE Diesel 125 HP, Руководство по установке

Страница: 75 / 84

75
OXE 125/150/175/200 HP INSTALLATION MANUAL
HARBOR ACCEPTANCE CHECKLIST (HAT)
Refer to Installation Manual (ODM1003) for further instructions
Installation checklist
General visional inspection for damages to the OXE outboard and the supplied accessories
Steering installation and function, general overlook according to supplier manual.
Mechanical
 Electrical  Hydraulic 
Make:___________________________________ Model:___________________________
External fuel pump and filter installed according to manual - Prefilter must beinstalled before
exterrnal pump
Fuel tank capacity - 100 L minimum
L
Fuel-lines ID ( Feed/Return) 10 mm minimum
mm mm
Distance between fuel tank and extenal fuel pump
mm
Battery Size Ah
Ah
ECU and starter fuse 100 A/350 A installed ECU 100A Starter 350A
Battery Cold Cranking Amps (CCA)/Marine Cranking Amps (MCA)
CCA MCA
Battery cable installation/routing/main switch
Battery(s) fully charged/secured/connections tight (hex nuts & lock-washers used)
Fuel line/connections properly installed (hoses free from any moving parts)
Clearance around the engine, verify full steering movement without interference
Killcord installed/Coast key installed
Primary belt setting High speed High torque
Propeller selection
Additional information regarding installed equipment and accessories:
Before start, check all fluid levels.
Refer to installation manual for specification and qty.
Engine coolant level
Engine oil level - chosen oil brand and model
Gearbox oil level - chosen oil brand and model
Upper belt housing oil level (primary belt) - chosen oil brand and model
Lower belt oil level (lower housing) - chosen oil brand and model
Power trim and tilt fluid level - chosen fluid brand and model
Air bled from fuel system
Trim and tilt function with adequate clearance
Throttle function/range (monitor value in display 0%-100%)
Instrument and gauges function control
Additional information:
HARBOR ACCEPTANCE CHECKLIST (HAT)