CIMCO OXE Diesel 125 HP, Руководство по установке

Страница: 69 / 84

69
OXE 125/150/175/200 HP INSTALLATION MANUAL
OPTIONS
OPTIONS
CABIN HEATER INSTALLATION
!
CAUTION
When installing on V2 engine versions, contact
technical.support@oxe-diesel.com
for information.
1.
Locate the coolant hose (1) on the engines starboard side, next to the crankcase ventilation and above the
ECU. Cut hose in this area as illustrated in the diagram.
2.
Fold down the coolant return hose
(2)
.
3.
Attach coolant hose, inner diam. 23 mm (0.905 in) , to each end of the hose with connectors (3) . Notice
the direction of the coolant flow.
4.
Route the additional coolant hoses
(4)
thru the prepared holes in the rubber detail located in the front of
the cowling.
5.
Connect hoses to a marine heater of your choice.
NOTE! It is possible to block the circulation with a valve at the heater unit if cool air is needed.
NOTE! Install an air bleed valve in the heater unit circuit to ensure air is bled free. Recheck every time the
engine coolant is changed.
NOTE! Ensure that the expansion tank remains in the highest point of the cooling system.