CIMCO OXE Diesel 125 HP, Руководство по установке

Страница: 50 / 84

50
OXE 125/150/175/200 HP INSTALLATION MANUAL
INSTALLATION WIRING
12V ELECTRICAL POWER CONNECTION
1.
Install a main electric power switch on the (B+) side . (See specifications of
cable length between battery and switch in the diagrams on the following
pages).
From the main batteri power switch:
2.
Install the (B+) starter supply cable to the engine starter power connector.
(See layout and specifications of the cables in the engine application
schematics to follow).
3.
Install the control (B+) power supply cable to the ECU & Helm power
connector on the engines power cable connector terminal.
(See layout and specifications of the cables in the engine application
schematics to follow)
.
4.
Prior to installing the ground cable – ensure that the main electric power
switch and the ignition key are in the off position.
5.
Connect the ground cable to the battery GND terminal and torque to
specification. Connect the other end for the (B-) Ground to the engines
battery power connecter terminal. Connect a common ground cable (wire size
same as engine battery cables) between negative (–) terminals on all starting
batteries.
Battery
Master
switch
GND cable
Control supply cable
Starter supply cable
Fuse, 100 A
Fuse, 350 A
Engine power cable connector terminal
12 V
95 Ah
850 CCA