1
1
2
3
26
29
24
4
6
5
7
1
English
24 EN
WASHING THE SOLUBLES CIRCUIT
Functioning:
At the end of each soluble product dispensing phase, the preset counter starts (from 1 to 20 minutes, OFF,
function disabled). Afterwards, the request to wash the circuit will appear.
Please follow these instructions for the washing process:
Level 1
CLEANING THE SOLUBLES CIRCUIT
6HOIYHUVLRQDFWLYDEOHRQO\LIFDUGLVHQDEOHG
WASHING IN PROGRESS
After the machine sends the
message.
Raise the dispensing nozzle (
1
).
Place the washing container sotto il
under the dispensing nozzle (
1
).
PRESS WASH
Group Washing
Milk Washing
Soluble Washing
Press the key
PRG
(
29
)
.
The following will appear on the
display:
Press the washing key (
26
)
until the message
“PRESS
WASH”
appears, as shown below:
Selection block:
If the washing cycle
is not performed within 60’ after the
message appears, with the
³EORFN
soluble circuit”
function set (YES),
the machine is blocked to prevent all
soluble-based selections.
The indications above are performed in
addition to the solubles circuit washing
process described on the following
page.
The washing cycle has ended when
this message appears on the display:
Remove the washing container.
Press the key
to return to
the wash cycle screen and the
RES
(
24
)
key to return to normal work
mode.
The washing cycle starts if the key
PRG
(
29
)
is pressed when the cursor is
on the group washing line, or when
the SOLUBLE WASHING option is
pressed directly on the Touch Screen.
The message below will appear on
the display:
WASH COMPLETED
MACHINE READY
