![Cimbali FAEMA Скачать руководство пользователя страница 71](http://html1.mh-extra.com/html/cimbali/faema/faema_use-and-installation_2607156071.webp)
3
5
1
12dt
12c
1
40
English
19 EN
Preliminary operations
Place the cup (or cups) under dispenser (
1
) of the required
group.
Soluble beverage dispenser
Press the chocolate (or other soluble beverage) dispensing
button corresponding to the required dose. The led in the
selected button will come on and dispensing will begin.
Dispensing will stop automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.
Mixed Soluble dispenser
Combined dispensing that can include coffee, milk and
solubles beverages.
Selection customization, with the sequence and duration
of the dispensing cycles for each beverage, is done by
the installer.
Insert the tube (
40
) into the milk container.
Press the mixed soluble dispensing button corresponding
to the required dose. The led in the selected button will
come on and dispensing will begin. Dispensing will stop
automatically.
Beverage dispensing can be stopped before the set time
by pressing the same key again.
HOT WATER: GENERAL INSTRUCTIONS
Place the appropriate container under the hot water
dispenser (
14
). Dispensing can be dosed automatically or
occur in continuous mode (manually).
Dispensing with automatic dosing
Press one of the hot water dispending keys (
12dt
) corre-
sponding to the desired dose.
The programmed dose of hot water will pour from the
dispenser (
14
) and will stop automatically.
Note Dispensing may be stopped by pressing the (
12dt
) key.
Pressing the (
12dt
) key does not change the parameters
set during the programming phase.
Manual dispensing
Press the hot water dispensing key (
12c
).
Hot water is dispensed continuously until the water key is
pressed again (
12c
) to stop it.
,QVRPHSURGXFWFRQ¿JXUDWLRQVKRWZDWHUGLVSHQVLQJFDQ
occur through the dispensing nozzle (
1
).
Hot water dispensing nozzle
.
Scalding hazard!
Use the appropriate
insulating devices to move the water and steam
wands.
NOTE: for dispensing very thick
chocolate, it is recommended to
remove the nozzle (
5
) and place the
tube directly on the mixer conveyor (
3
).
11.3 Dispensing of beverages - Chocolate / Solubles
11.4 Dispensing of beverages - hot water