Cima New Plus, Инструкция по обслуживанию

Страница: 33 / 96

Rev.00 - Jan. 2013
25
New Plus
42-45-50-55
P26. NIPPLE FOR FLOWMETER CONNECTION
The 1”M/M nipple is placed between the delivery pipe for the sprayhead (T4) and the electrical distri
-
butor (E9), and it allows to disconnect the pipe and place a flowmeter between the pipe itself and the
electrical distributor, to be used for the periodical revising tests.
E9. ELECTROVALVES ASSEMBLY
(with remote control)
01267
E9
E10
T5
T4
P11
T5
T4
P11
01268
P9
It is connected with the feeding pipe (T4), the
distribution pipes (T5) and the electrical unit (E10),
which is fastened on the tractor. The solenoid
valves open and close themselves, according
with the action carried out on the electrical control
unit switches.
In the E.P.A. versions, the controls of the cross
section solenoid valves are situated on the elec-
tronic control unit (see specific manual).
01294
T4
P26
P9. MANUAL DISTRIBUTOR WITH 2 LEVER-OPERATED TAPS
(for versions in which this envisaged)
It connects the feeding pipe (T4) to the distribution
piping (T5). It remote-controls the closing and
opening of the pulverising. The mount bracket,
supplied with the machine, must be secured to
the tractor within the driver’s reach. When the
machine is not hitched to the tractor, it must be
placed on the forward part of the sprayer’s frame.
Each tap permits the spraying from a single side
of the head: to the right and to the left respectively.
They are open when the levers are set in the
vertical position.
They are closed when the levers are horizontal.