Cima New Plus, Инструкция по обслуживанию, Страница: 28 / 96

Rev.00 - Jan. 2013
20
New Plus
42-45-50-55
C A
D
P1. TANK
Tanks utilised:
polyethylene tanks of 300, 400 and 600 litre
capacity.
Each tank is made up of:
— tank main filler (BP) spout of 355 mm diameter,
with collapsible lid, breather and labyrinth seal,
for the filling with spraying products. Plastic cup-
like filter: 302 mm external diameter, height 254
mm with powder mixing device (for versions on
which it is foreseen
);
— supplementary tank filler (BS) with 255 mm
diameter screw-type lid, for filling with clear water
and plastic cup-like filter: external diameter 204
mm, height 240 mm;
— hydraulic agitation system connected to the
regulator (P5) and to the pump (P4).
— transparent level indicator external pipe with
graduated scale;
— pneumatic agitation, connected to the piston tap
found above the tank and connected through
piping to the air intake located on the fan casing.
A = OPEN
C = CLOSED
P22. HAND WASHING TANK
Incorporated polyethylene 17 litre capacity hand
wash tank, with external service tap; opening
though a 255 mm diameter screw lid.
P2. 3-WAY LEVER TAP
Fixed to tank (P1) and connected to the suction
piping (T1).
When the sprayer is working the lever
tap must ALWAYS be oriented toward
the suction pipe, in “A - WORKINK”
position.
The different positions of tap (P2), displayed on
the decal placed on the machine, are as follow:
A - WORKING
(phytosanitary products distribution).
D - CLEANING CIRCUIT
C - CONNECTION/DISCONNECTION FILLING
PIPE
HYDRAULIC
AGITATION
HAND
WASHING
TANK
PNEUMATIC
AGITATION
01250
01249
01251
BP BS
P5
PRESSURE
REGULATOR
FROM
PUMP (P4)
P1
MAIN TANK
P22
LEVEL
INDICATOR
AIR FROM
FAN CASING
P2
P15 P16
*
(*) for versions on which it is foreseen