Cima New Plus, Инструкция по обслуживанию, Страница: 66 / 96

Rev.00 - Jan. 2013
58
New Plus
42-45-50-55
13.4 CLEANING OF FILTER’S CARTRIDGE
1. Set the lever of 3-way tap (P6) to the “D” position
2. Verify that the faucet (P12) of the powders mixer
(or the faucet of the self-cleaning filter P25 - for
versions on which it is foreseen) is closed.
3. Close the manual distributor’s taps (P9) or
position the switches of the control electric
switchboard (E10) on “OFF”
4. Undo the thumb screw and remove the body
of the filter.
5. Extract the cartridge: clean the grill and the
retaining O.Ring.
6. Reassemble the cartridge and secure the lid with
the thumb screw. Pay attention to the O-Ring
of the lower body during the assembly : the
incorrect sealing of the filter will jeopardise the
proper operation of the sprayer and cause loss
of the mixture
00306
FILTERING
CARTRIDGE
O.RING
O.RING
LOWER
BODY
OF FILTER
KNOB
13.5 PURGING OF RESIDUES FROM FILTER
With the machine in operation and the taps of the manual (P9) or electrical (E9) distributor closed.
Opening the powder mixer tap (P12) (or the self-cleaning filter faucet P25 -
for versions on which it is
foreseen) the delivery flow will drag possible sludge to the bottom of the filter within the tank through the
piping (T6) thus partially cleaning the filtering cartridge. Close the tap when the operation is completed.
When the machine is in operation, check that the drain tap (P12) (or P25) is closed before
opening the main feeder.
* for versions on which it is foreseen
* for versions on which it is foreseen
00975
P4
P4
P6
P6
P7
P7
P13
P12
T6
T6
P25
P25
*
*
*
*
P12