manualshive.com logo in svg

Cima Link, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Cima Link Скачать руководство пользователя страница 69

1-2009

Link 50 - 55

61

14

FAULTS FINDING

14

A. FAULT:

By  utilising the filler piping the pump doesn’t operate (suction)

It is necessary to disengage the drive outlet (PTO) and wait for it to stop rotating
before repeating the filling operation.

1. CAUSE: the quantity of water poured into the tank is insufficient to trigger the pump.

REMEDY:

Add water to the tank until the pump starts its cycle.

2. CAUSE: the filler piping sucks in air.

REMEDY:

Completely submerge the suction filter of the filler piping.

3. CAUSE

The pump filter is clogged.

REMEDY: 

Clean the filter

4. CAUSE

Lack of seal of the pipes.

REMEDY:

Check the tightening of ring nuts, fittings and clamps. Check the efficiency

of sealers and that piping elements are not cracked or broken. Replace parts that are
possibly found to be defective.

5. CAUSE

Slipping of the pump’s belt.

REMEDY: 

Check the tension of the belt-tensioner’s spring. (4÷5 cm).

6. CAUSE

The pump’s belt might be broken.

REMEDY: 

Replace the belt.

B. FAULT:

Leakage and dripping from the pump

1. CAUSE

Non-sealing of the fittings and clamps connecting the piping to the pump.

REMEDY:

Check for proper tightening of ring nuts and clamps. Check the efficiency of

the sealers. Replace parts that are possibly found to be defective.

2. CAUSE

Mechanical sealing defective.

REMEDY:

 Address a C.I.M.A. point of “Sale and Service”.

C. FAULT:

Drop in pressure of the hydraulic circuit signalled by the gauge

1. CAUSE

Dirty filter.

REMEDY

: Clean the cartridge

2. CAUSE

The pump filter is clogged.

REMEDY: 

Clean the filter

3. CAUSE: Faulty sealing of the hydraulic circuit.

REMEDY

:

 

Check the operation of the pump and the tension of its belt. Check the proper

tightening of ring nuts, fittings and clamps. Check the efficiency of the sealers and the
integrity of the piping. Replace the parts that are possibly found to be defective.

4. CAUSE: Gauge defective.

REMEDY

: Replace the pressure gauge.

5.  CAUSE:

Suction or gauge connection pipe clogged

.

REMEDY

: Clean.

D.FAULT:

Variations in the pressure of the hydraulic circuit (marked by the gauge)

1.  CAUSE

Lack of seal of the pipes and/or  the valves.

REMEDY

: Check the clamping of the ring nuts, the connections and the clamps.

Verify the efficiency of the gaskets and the integrity of the pipes.
Replace the possibly defective parts.

2.  

CAUSE: Residue of product at the entrance of the gauge

REMEDY

: Clean.

Содержание Link





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды