Cima Link, Инструкция по эксплуатации и обслуживанию

Страница: 41 / 92

1-2009
Link 50 - 55
33
5 COUPLING MODALITIES 5
Pairing suggested for tractors
of at least
LINK
50
LINK
55
LINK
55 S
LINK
55 E
CV SAE 65 70 80 90
kW 48 52 58 66
LINK005
The hitching has to be carried out on a plane surface, after having checked that all
the people not charged with the operation moved away, as well as the children and
the animals possibly present.
EXECUTION:
1.
Loosen the chains of the lifter arms.
2. Start the tractor and take the lifter’s arms to the level of the machine’s pins.
3. Stop the tractor and remove the key from the control panel.
4. Insert the toggle joints on the machine’s pegs, locking them with the clip pins.
5. Hook the 3 rd -point rod from the tractor to the machine and securing it with the peg and the clip pin.
6. Screw the rod to set it into tension.
7. Start the tractor and hoist the sprayer until the 2 PTO are the same height.
8. Stop the tractor, remove the key from the control panel and make sure
that no one approaches the hydraulic controls of the lifter.
NEVER OPERATE OR STAND BENEATH THE MACHINE OR IN THE AREA THAT
COULD BE INVOLVED IN ITS SUDDEN LOWERING.
9. By acting on the 3 rd -point rod, vertically align the sprayer. N.B.: block the 3 rd -point rod with the
specific lock ring.
10. Block the coupling by tightening the chains of the hoister arms.
5.1 - HITCHING TO THE TRACTOR
Check that the tractor “permissible carried weight” and “permissible trailed
weight” are compatible with the sprayer weight, when this is fully loaded and
complete with the equipments mounted for the treatment (see the Paragraphs
“3.1” - “4.4.1” as well as the jointed documents).
THE TRACTOR’S POWER TAKE-OFF (PTO), UNDER ALL UTILISATION CONDITIONS,
MUST PROVIDE A POWER EXCEEDING THAT ABSORBED BY THE SPRAYER.
When the operation is completed the 2 drive outlets (PTO) must be positioned on
the same axis, both in vertical and horizontal direction.
00285 00286