Cima Link, Инструкция по эксплуатации и обслуживанию

Страница: 43 / 92

1-2009
Link 50 - 55
35
Position the electrical cables W1 and W2 in such a way as to avoid risking their being
wrenched off during treatments. If necessary, use some securing clamps.A
sudden interruption of power will lock the 2 solenoid valves of the electrical
distributor “E9”. Should this fault take place when they are in the open position,
it is necessary to:
- Stop the tractor and remove the key from the control panel.
- Position the cock (P2) to “B”.
- Restore the electric current.
IN CASE OF A PIPE BURST:
1 - Stop the tractor and remove the key from the control panel.
2 - Close the electrovalves (E9), the switches on the control panel (E10) must be on OFF.
3 - Close the pressure regulator (P5) turning clockwise the pressure regulation knob or keep the
joystick (E10) in position “+” for at least 15 seconds on the electrical control box.
4 - Replace the broken pipe (for the elimination of these parts, please follow the current regulations).
5.3.2 - Manual 2-tap distributor - P9
(for the versions where foreseen)
ELECTRICAL
CONTROL
PANEL
TO THE
SERVICE
SOCKET
MOUNTING
BRACKET
E10
E9
®
+
-
ON
Rem
ote
Control
H O
2
ON
OFF
OFF
Pum
p
00085
TO THE ELECTRICAL
DISTRIBUTOR (E9)
W2
W1
00086
00084
MOUNTING
BRACKET
MANUAL
DISTRIBUTOR
BAYONET
SUPPORT
P9
T4
T5
1 - Mount the fastening bracket on the tractor
within the driver’s reach (if this is not already
present on the tractor).
2 - Insert the distributor’s bayonet support in the
securing bracket.
3 - Connect the feeding pipe (T4).
4 - Connect the distribution piping T5 to the hydrau-
lic circuit of the distribution device (head)
mounted on the machine (follow the instruc-
tions of the specific “use and maintenance”
book-let which is supplied with it).
ELECTRICAL
DISTRIBUTOR (E9)