CIAT Magister 2 Series, Установка, Эксплуатация, Пусконаладка, Обслуживание

Страница: 17 / 101

15
No. Description Setting Default Display conditions
Setpoint Management (
CONTINUED
)
1 127 Cooling setpoint adjustment = f (out. temp.) No - Yes No If P2 = 1, 2 or 3 and P119 ≠ Heating
1 128 Drift start -20 to 55°C (resolution: 1) 25 If P127 = Yes
1 129 Drift end P128 + 5 K at 60°C (resolution: 1) 35 If P127 = Yes
1
130 Maximum setpoint at end of drift P52 + 1 K at 30°C (resolution: 0.1) 15 If P127 = Yes
1 131 Heating setpoint adjustment = f (out. temp.) No - Yes No If P2 = 1 or 3 and P119 ≠ Cooling
1 132 Drift start -20 to 55°C (resolution: 1) 15 If P131 = Yes
1 133 Drift end -25 to P132 - 5 K (resolution: 1) 5 If P131 = Yes
1 134 Maximum setpoint at end of drift
Highest setpoint if P120 ≠ 1 or setpoint if P120 =
1 at 60°C (resolution: 0.1)
P123 If P131 = Yes
1 135 Minimum boiler drift setpoint 30 to 55°C 50°C If P111 = Boiler
1 136
Maximum air temperature in automatic
heating mode
- 5 to 25°C (resolution 1) 16 If P119 = 5
1 137 Minimum air temperature in automatic
cooling mode
P136 + 2 to 40°C (resolution: 1) 20 If P119 = 5
2 141 Control mode
1- Return
3- Water supply
4- Supply with compensation
1
2 142 Water loop winter protection No - Yes No
Visible if P2 = 1 and P141 = 1 and
heating mode
Visible if P2 = 1 and cooling mode
Visible if P2 = 2 or 3
2 143 Stage differential 0.5 to 5 K (resolution: 0.5)
2
1.5
If P141 = 1, 2
if P7 = I
NVERTER
2 144 Interstage differential 0.5 to 5 K (resolution: 0.5) 1.5
Supply with compensation by return
2 145 P coefficient 0.3 to 2 (resolution: 0.1) 1 If P141 = 3, 4 and P7 ≠ I
NVERTER
2
146 I coefficient 0 to 1 (resolution: 0.1) 0 If P141 = 3, 4 and P7 ≠ I
NVERTER
2 147 D coefficient 0 to 1 (resolution: 0.1) 0 If P141 = 3, 4 and P7 ≠ I
NVERTER
2 148 T coefficient 10 to 240 seconds (resolution: 10) 60 If P141 = 3, 4 and P7 ≠ I
NVERTER
2 150 Compensation of coefficient 0.1 to 1 (resolution: 0.1) 0.5 If P141 = 4
2 151 Compensation of time 5 to P148-2 (resolution: 1) 10 If P141 = 4
For storage control (C
RISTOPIA
)
3 154 Storage Yes/No No If P119 ≠ 2, P120 ≠ 1 and P120 ≠ 4
3 155 ΔT of control 0.5 to 10°C (resolution: 0.5) 5 If P154 = Yes
Defrosting
3 157 Temperature at start of defrosting -5 to 0°C (resolution: 0.5) -2 If P2 = 3
3
158 Temperature at end of defrosting 10 to 30°C (resolution: 1)
15 if R407C
otherwise 25
If P2 = 3
3 159 Frosting time calculation Fixed time Optimised Optimised If P2 = 3
3 160 Fixed time 30-45-60 45 If P2 = 3
3 161 Coil frosting factor 0 to 2 (resolution: 0.01) 0.3 If P159 = Optimised
3 162
DTD correction based on outdoor
temperature
0 to 1 (resolution: 0.01) 0.2 If P159 = Optimised
3 163 CP off time delay for defrosting cycle 0 to 5 min. 60s
P2 = 3
if P7 ≠ I
NVERTER
3 164 ΔP interlocking ventilo HP 1 to 20 b (resolution: 0.5) 2 If P2 = 3, (P HPR = P54 - P164)
3
165 DHP differential 1 to 5 b (resolution: 0.5) 2 If P2 = 3
3 166 Defrosting HP control coefficient 1 to 5 b (resolution:1) 3 If P21 ≠ 1
Charge limit
2
171 Maximum return temperature, stage 2 20 to 50°C (resolution: 1) 35 If P4 + P5 ≥ 2 and P119 ≠ Heating