CIAT Magister 2 Series, Установка, Эксплуатация, Пусконаладка, Обслуживание

Страница: 21 / 101

19
No. Description Setting Default Display conditions
I
NPUTS
(
CONTINUED
)
1 418 Check of manual HP1 pressure switch input Open/Closed
1 419 Check of stage 1, circuit 1 fault input Open/Closed
1 420 Check of stage 2, circuit 1 fault input Open/Closed If P4 = 2
1
422 Check of manual HP2 pressure switch input Open/Closed If P3 = 2
1 423 Check of stage 1, circuit 2 fault input Open/Closed If P3 = 2
1 424 Check of stage 2, circuit 2 fault input Open/Closed If P5 = 2
1 425
Check of fault input for circuit 1 electronic
expansion valve
Open/Closed If P42 = ALCO
1 426 Check of fault input for circuit 2 electronic
expansion valve
Open/Closed If P42 = ALCO
O
UTPUTS
1 430 Pump 1 control state On/Off
1 431 Pump 2 control state On/Off If (P2 = 1) or P25 = 2
1 432 State of circuit 1 Y/C control output On/Off If P2 = 3
1 433 State of circuit 2 Y/C control output On/Off If P2 = 3 and P3 = 2
1 435 State of heat trace cable control output On/Off If P2 ≠ 1 (water-to-water)
1 436 State of heater control output On/Off If P2 ≠ 1 (water-to-water)
1 437 State of recovery heat trace cable control output On/Off If P2 ≠ 1 (water-to-water) and P29.1 = Yes
1 438 State of maximum power output On/Off If P111 = Max. power
1 439 State of boiler output On/Off If P111 = Boiler
1 440 State of cooling/heating output On/Off If P111 = Cooling/Heating
1 441 State of HP control output, stage 1, circuit 1
On/Off if P21 = without
High Temperature mode/Low Noise mode/Off if
P191 = acoustic
If P21 = without, P2 = 2, 3
1 442 State of HP control output, stage 2, circuit 1 On/Off If P180 = 2 and P3 = 1, P2 = 2, 3
1 443 State of HP control output, stage 1, circuit 2 On/Off If P180 = 1 and P3 = 2, P2 = 2, 3
1
444 State of HP control output, stage 2, circuit 2 On/Off If P180 = 2 and P3 = 2, P2 = 2, 3
1 445
State of HP control output, stage 3, circuit 1
or
State of HP control output, common stage 1
On/Off
If P180 = 3 and P3 = 2
P11 = split P2 = 2, 3 or If P180 = 3 and
P3 = 2 P11 = mixed
1
446
State of HP control output, stage 3, circuit 2
or
State of HP control output, common stage 3
On/Off
If P180 = 3 and P3 = 2
P11 = split P2 = 2, 3 or If P180 = 3 and
P3 = 2, P11 = mixed
1 447 Driving voltage, stage 1, HP control 0-10 V If P21 = 2 or 3 and P11 = Intertwined
1 448 Driving voltage, stage 1, circuit 1, HP control 0-10 V If P21 = 2 or 3 and P11 = split or mixed
1 449 Driving voltage, stage 1, circuit 2, HP control 0-10 V If P21 = 2 or 3 and P11 = split or mixed
1 450 Driving voltage, common stage 1, HP control 0-10 V If P21 = 2 or 3 and P11 = Mixed
1 451 State of circuit 1 balance valve output On/Off If P12 = Yes
1 452 State of circuit 2 balance valve output On/Off If P12 = Yes
1 530 State of electric stage 1 On/Off If P22 = Yes
1 531 State of electric stage 2 On/Off If P22 = Yes
1
532 State of electric stage 3 On/Off If P22 = Yes
1 533 State of electric stage 4 On/Off If P22 = Yes and P112 = 4
1 535 Air blade percentage information 0-100% If P20 =Yes and P10 = Centrifugal
1 555 CPU version number
1
556 Console version number
*
1 557 Version number of circuit 2 board If P3 = 2
1
558 Version number of changeover board If P2 = reversible air-to-water
1 559 Version number of auxiliary heater board If P22 = Yes
1 560 Version number of circuit 1 expansion valve XX.YY VCM XX.YY If P42 = CIAT and P3 = 1
1 561 Version number of circuit 2 expansion valve XX.YY VCM XX.YY If P42 = CIAT and P3 = 2
1 570 "SO" order number" To be entered via a PC
1 571 MO number To be entered via a PC
1 572 Machine identification name To be entered via a PC
1 573 Machine identification number To be entered via a PC