CIAT Magister 2 Series, Установка, Эксплуатация, Пусконаладка, Обслуживание

Страница: 19 / 101

17
No. Description Setting Default Display conditions
Read-only (
CONTINUED
)
1 251 Control setpoint If P141 ≠ 5 and ≠ 6
1 252 Outdoor air temperature
1 255 Water inlet temperature, heat exchanger 1
1
256 Water outlet temperature, heat exchanger 1
1 257 Hot water inlet temp., condenser If P2 = 1 and P141 = 1
1 258 Hot water outlet temp., condenser If P2 = 1 and P141 = 3
1 259
Refrigerant temperature, circuit 1 coils
A-B
C-D If P2 = 3
If P2 = 3 and P14 = 2
If P2 = 3 and P14 = 4
1 260 Refrigerant temperature, heat exchanger 1 If P2 = 1 or 2
1 261 Manifold water outlet temperature If P6 = 2 - P2 = 1, 2 or 3
1 262 Water outlet temperature, heat exchanger 2 If P6 = 2
1 263
Refrigerant temperature, circuit 2 coils
A-B
C-D If P2 = 3 and P3 = 2
If P2 = 3 and P3 = 2 and P14 = 2
If P2 = 3 and P3 = 2 and P14 = 4
1 264 Refrigerant temperature, heat exchanger 2 If P2 = 1 or 2 and if P6 = 2
1 265 Exchanger ambient temperature If P2 = Air-to-water
1 266 Calculated frosting time, circuit 1 If P2 = 3,
1
267 Calculated frosting time, circuit 2 If P2 = 3 and P3 = 2
1 268 Value of reference ΔT for defrosting of circuit 1 If P159 = Optimised
1 269 Value of reference ΔT for defrosting of circuit 2 If P159 = Optimised and P3 = 2
1
285 Runtime in heating mode If P119 ≠ Cooling
1 286 Runtime in cooling mode If P119 ≠ Heating
1
287 Pump 1 runtime (in hours)
1 288 Pump 2 runtime (in hours) If (P2 = 1) or P25 = 2
1
289 No. of times P99 set to "No"
1 290 No. of water flow cut-offs in 1 hour
Visible if (cooling and P2 = 1) or
if P2 = 3 or if P2 = 2 and P25 ≠ 2
Circuit 1
1 300 Circuit 1 HP
1 300.1 Circuit 1 HP control setpoint If P3 = 1 or 2 and P11 = Intertwined
1 301 Circuit 1 condensation temperature See appendix
1 302.1 Discharge temperature 1
1 302.2 Discharge temperature 2 If P4 = 2
1 303.1 Desuperheat on discharge 1 P302.1 - P301
1 303.2 Desuperheat on discharge 2 P302.2 - P301 If P4 = 2
1 304 Circuit 1 LP
1 305 Circuit 1 evaporation temperature See appendix
1 306 Circuit 1 suction temperature °C
1 307 Circuit 1 superheat °C
1 308 Number of HP1 cut-offs in 24 hours
1 309 Number of LP1 cut-offs in 24 hours
1 310 Number of starts, stage 1, circuit 1
1 311 Runtime (in hours), stage 1, circuit 1
1 312 SCP, stage 1, circuit 1
1 313 Number of starts, stage 2, circuit 1 If P4 = 2
1 314 Runtime (in hours), stage 2, circuit 1 If P4 = 2
1 315 SCP, stage 2, circuit 1 If P4 = 2
1 322 No. of water line frost protection cut-offs, circuit 1
1 323 No. of refrigerant line frost protection cut-offs, circuit 1 If P2 ≠ 3
1 324.1
No. of cut-offs caused by discharge
temperature 1 in 24 hours
1 324.2 No. of cut-offs caused by discharge
temperature 2 in 24 hours
If P4 = 2