CIAT Magister 2 Series, Установка, Эксплуатация, Пусконаладка, Обслуживание

Страница: 20 / 101

18
No. Description Setting Default Display conditions
Circuit 1 (
CONTINUED
)
1 325 Opening of circuit 1 expansion valve % If P42 = CIAT and P3 = 1
1 326 Circuit 1 liquid temperature °C If P2 = 1 or 2 or (3 + cooling mode)
1 327 Circuit 1 subcooling °C If P2 = 1 or 2 or (3 + cooling mode)
1
328
No. of cut-offs caused by C1 electronic
expansion valve fault in 24 hours
If P42 = ALCO
Circuit 2
1
330 Circuit 2 HP If P3 = 2
1 330.1 Circuit 2 HP control setpoint If P3 = 2 and ≠ Intertwined
1
331 Circuit 2 condensation temperature See appendix If P3 = 2
1 332.1
Discharge temperature 3
Discharge temperature 2
°C
If P3 = 2 and P4 = 2
If P3 = 2 and P4 = 1
1 332.2 Discharge temperature 4 °C If P3 = 2 and P5 = 2
1 333.1
Desuperheat on discharge 3
Desuperheat on discharge 2
P332.1 - P331
If P3 = 2 and P4 = 2
If P3 = 2 and P4 = 1
1
333.2 Desuperheat on discharge 4 P332.2 - P331 If P3 = 2 and P5 = 2
1 334 Circuit 2 LP If P3 = 2
1 335 Circuit 2 evaporation temperature See appendix If P3 = 2
1 336 Circuit 2 suction temperature °C If P3 = 2
1 337 Circuit 2 superheat °C If P3 = 2
1 338 Number of HP2 cut-offs in 24 hours If P3 = 2
1 339 Number of LP2 cut-offs in 24 hours If P3 = 2
1 340 Number of starts, stage 1, circuit 2 If P3 = 2
1 341 Runtime (in hours), stage 1, circuit 2 If P3 = 2
1 342 SCP, stage 1, circuit 2 If P3 = 2
1 343 Number of starts, stage 2, circuit 2 If P3 = 2, P5 = 2
1 344 Runtime (in hours), stage 2, circuit 2 If P3 = 2, P5 = 2
1 345 SCP, stage 2, circuit 2 If P3 = 2, P5 = 2
1
352 No. of water line frost protection cut-offs, circuit 2 If P3 = 2 and P2 ≠ 4, 5
1 353 No. of refrigerant line frost protection cut-offs, circuit 2
1 354.1 No. of cut-offs caused by discharge T° 2 in 24 hours
No. of cut-offs caused by discharge T° 3 in 24 hours
If P3 = 2 and P4 = 1
If P3 = 2 and P4 = 2
1
354.2 No. of cut-offs caused by discharge T° 4 in 24 hours If P3 = 2 and P5 = 2
1 355 Opening of circuit 2 expansion valve % P42 = CIAT and P3 = 2
1 356 Circuit 2 liquid temperature °C
If [P2 = 1 or 2 or (3 + cooling mode)]
and P3 = 2
1 357 Circuit 2 subcooling °C
If [P2 = 1 or 2 or (3 + cooling mode)]
and P3 = 2
1 358
No. of cut-offs caused by C1 electronic
expansion valve fault in 24 hours
If P42 = ALCO
I
NPUTS
1 400 Automatic machine operation control Open/Closed
1 402 Setpoint 1/Setpoint 2 selection Open/Closed If P120 = 2 via On/Off control
1 403 Water flow check Open/Closed
1 404 Fan fault check Open/Closed If P2 ≠ 1 or 5
1 405 Cooling/Heating input check Open/Closed If P119 = Cooling/Heating via On/Off control
1 406 Phase controller Open/Closed
1 407 Recovery operating mode selection Open/Closed If P29 = Yes
1 408 Check of fault input for auxiliary electric heater 1 Open/Closed If P22 = Yes
1 409 Check of fault input for auxiliary electric heater 2 Open/Closed If P22 = Yes
1 410 Check of configurable auxiliary electric heater input Open/Closed If P22 = Yes
1 414 Check of override/load shedding input 1 Open/Closed
1 415 Check of override/load shedding input 2 Open/Closed If P4 = 2
1 416 Check of override/load shedding input 3 Open/Closed If P3 = 2
1 417 Check of override/load shedding input 4 Open/Closed If P5 = 2