Chungho Iguassu Ice 700, Техническое руководство

Страница: 20 / 58

P
ro
duc
t
Usa
ge
20
1
2
ECONO(power saving) Function Setting
Touch the HOT/ECONO(hot water operation/power saving selection) touch
sensor button.
Power saving display LED is turned on and power saving function is set.
through
operation of light sensor detection in accordance to the brightness around the product while
hot water function is set.
ECONO(power saving) Function Release
Touch the HOT/ECONO(hot water/power saving selection) touch sensor
button.
* Cautions during Use of Power Saving Function
If power saving function is selected, the hot water system is automatically turned on/off
according to the brightness of the product’s surroundings. If a dark area suddenly becomes
bright, hot water cannot be immediately ready for us. Therefore, in order to have hot water
available at all times, do not use the power saving function.
Releasing(Beep)
If the HOT/ECONO (hot water operation/power saving selection) touch
sensor button and HOT (hot water dispenser selection) touch sensor
buttons are simultaneously touched for over 3 seconds, the function
is released.
When beep function is turned on, ding~ding~ding~ding~ding~ is sounded.
And, when it is released, HOT LOCK (hot water lock) LED and HOT/ECONO
(hot water operation/power saving selection) LED will flash 5 times in one
second intervals
Resetting(Beep)
If the HOT/ECONO (hot water operation/power saving selection) touch
sensor button and HOT (hot water dispenser selection) touch sensor
buttons are simultaneously touched for over 3 seconds, beep is reset.
And, when it is released, HOT LOCK(hot water lock) LED and HOT/ECONO
(hot water operation/power saving selection) LED will flash 5 times in one
second intervals.
1
1
1
2
2
2
3
3
6. Usage
(5) ECONO(power saving) Function Setting
① Touch the HOT/ECONO(hot water operation/power saving selection ) touch
sensor button.
② Power saving display LED is turned on and power saving functio n is set.
※Po wer saving function is automatically set to turn on/off the hot water system
through operation of light sensor detection in accordance to th e brightness
around the product while hot water function is set.
(6) ECONO(power saving) Function Release
① Touch the HOT/ECONO(hot water/power saving selection) touch se nsor
button.
② Power saving display LED is turned off and power saving functi on is released.
Operation conversion when
touching the HOT/ECONO(hot
water operation/power saving
selection) touch sensor button.
※ Cautions during Use of Power Saving Function
If power saving function is selected, the hot water system is a utomatically
turned on/off according to brightness of the products surroundi ngs, so
hot water can not be immediately used after it becomes bright a gain
around the product. Therefore, in order to use hot water all th e time, do
not use the power saving function.
(7) Releasing(Beep)
① If HOT/ECONO(hot water operation/power saving selection) touch sensor
button and HOT(hot water dispenser selection) touch sensor but ton is simul
taneously touched for over 3 seconds, the function is released.
② When beep function is turned on, ding~ding~ding~ding~ding~ is sounded.
③ And, when it is released, HOT LOCK(hot water lock) LED and HOT /ECONO
(how water operation/power saving selection) LED will flash 5 t imes in one
second intervals.
(8) Resetting(Beep)
① If HOT/ECONO(hot water operation/power saving selection) touch sensor
button and HOT(hot water dispenser selection) touch sensor butt on is simul
taneously touched for over 3 seconds, beep is reset.
② When beep is turned off, ding~ding~ding~ding~ding~ sound goes off.
③ And, when it is released, HOT LOCK(hot water lock) LED and HOT /ECONO
(how water operation/power saving selection) LED will flash 5 t imes in one
second intervals.